Audio Technica AT33PTG / II MC pickup, pickup, hifiteam, home entertainment for you

Audio Technica AT33PTG / II MC pickup

Audio Technica


€ 480.00 € 499.00


Click here if you want to be informed as soon as this article is available.



Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.

High performance and long-life MicroLinear ™ stylus
MicroLinear ™ (ML) is a specialized polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high-range reproduction even when playing at the inner circumference of records. 1000 hours. The XNUMX hours.

Type Dual Moving Coil
Mounting 1 / 2 "Centers
Frequency Response 15 - 50,000Hz
Body Material Aluminum / synthetic resin
Channel Separation 30dB (1kHz)
Output Channel Balance 1dB (1kHz)
Output Voltage 0.3mV (1kHz and 5cm / sec.)
Vertical Tracking Angle 23 °
Vertical Tracking Force Range 1.8 - 2.2g (2.0g standard)
Stylus Shape Microline ™
Stylus Curvature Radius Micro linear
Stylus Construction Nude Square Shank
cantilever Gold-plated solid boron
Coil Impedance 10Ω (1kHz)
Coil Inductance 22μH (1kHz)
DC Resistance 10Ω
Static compliance 40 10 x-6cm / dyne
Dynamic compliance 10 × 10-6cm / dyne (100Hz)
Terminal pins Brass
Recommended Load Impedance Min 100Ω
Weight 6.9g
Dimensions H16 × × W16.6 D26.5mm
Replacement stylus When the stylus is replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorized Service Center. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
Accessories Included 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)