OUR TIP TO MODERNIZE YOUR PLANT FITS ANY EQUIPMENT, only 1 free CHINCH INPUT is required.
MODERNIZE YOUR SYSTEM: JUST PLUG IN THE FREE ENTRANCE OF YOUR AMPLIFIER AND, FINALLY, ALSO FROM YOUR MOBILE PHONE, LAPTOP, COMPUTER (with Bluetooth built-in) PLAY MUSIC IN GOOD QUALITY! (CD quality)
VERY EASY TO USE !
Quotes Pro-ject Audio homepage:
Audiophile Bluetooth audio receiver with aptX
• Wireless music streaming with near
• Bluetooth 3.0
• Supports aptX & SBC Bluetooth codecs
• Easy installation and use
• Fast connection (3 to 5 seconds)
• Stores various source devices up to 8
• Maximum possible reception area 10 meters
• Analog RCA and RCA & Toslink digital output
• Separate power supply included
• Front black or silver
Up to 8 different source devices such as smart phones and tablets can be stored. Analog and digital connections to amplifiers and external D / A converters provide maximum flexibility.
Receive range within 10m (view distance)
Bluetooth profile A2DP
Supported codecs aptX, SBC
Receive range 2402 ~ 2480 Mhz
Sensitivity - 84dBm
Maximum received signal at 0.1% BER> = -10dBm
Maximum interference> = -30dBm
Noise distance -156dBm / Hz
Audio Output Voltage (nominal) 2 Vrms
Frequency range 20Hz - 20kHz
Analog output RCA stereo
Digital output optical S / PDIF (Toslink)
Power adapter 5V / 1000mA DC; 220 - 240V, 50Hz
Standby consumption <1 watts
Current consumption 200mA DC
Dimensions W x H x D (T with sockets) 116x 37 x 103 (108) mm
Weight 320g without power supply
FAQ - Tips for Bluetooth Box S2
Question: Can multiple Bluetooth devices be connected at the same time?
Answer: Bluetooth establishes a point-to-point connection between two devices. Multiple source devices would only respond if 2 or more Bluetooth devices are housed in parallel in a receiver. But since it does not make much sense for a receiver to play different pieces of music from different sources at the same time, this is not possible with the Bluetooth Box S2. However, different Bluetooth sources can be played back one after the other.
Question: Is the connection established automatically after initial configuration?
Answer: After initial configuration, the Bluetooth Box S2 "remembers" the device being played and can play music back from it, if another selected Bluetooth connection is not already active. The connection to the last connected source device takes place automatically when this is again in the reception area of the Bluetooth box S2. If the Bluetooth function is disabled on the player, it must be reactivated beforehand.